Ikea trådfri lampa svarar inte

Reseat/Replace Batteries

To reseat or replace the batteries for your steering devices, you have to perform the same steps:

The Ikea Trådfri steering devices run on CR2032 batteries.

For a Remote Control

1. Use a screwdriver or a similar tool to remove the battery cover of the remote control.
   

1. Reseat or replace the battery with the positive side outward.
   

1. Replace the battery cover.
   

For a Wireless Dimmer

1. Press the wireless dimmer against the palm of your hand and turn the cover counter clockwise then lift it to remove it.
   

1. Use a screwdriver or a similar tool to detach the dimmer body from the base.
   

1. Flip the dimmer body on the other side and reseat or replace the battery with the positive side outward.
   

1. Reattach the dimmer body into the base.
   

1. Replace the cover and turn it clockwise to secure it.
   

For a Motion Sensor

1. Use a screwdriver or a similar tool to remove the battery cover of the motion sensor.
   

1. Reseat or replace the batteries with the positive side outward.
   

1. Replace the battery cover.
   

9.

Jag har en äldre modell men ville testa den nya så jag köpte med en hem för att prova för 99:-

Vad fick jag med i köpet

Jag fick med följande i kartongen

Rörelsensor
Manual
Självfäftande tejp
2st Batterier

TRÅDFRI Rörelsensor

Model: TRÅDFRI Rörelsensor
Produktnamn: E1745
Mått:
Längd: 74 mm
Bredd: 44 mm
Höjd: 37 mm
Radio: Zigbee
Batteri: 2st CR2032
Sensorns vinkel: 60-120
Sensorns räckvidd: ca 10m
IP-klass: IP44
Funktion: Rörelsesensor, Dag och nattinställning, Ljusstyrka 30% eller 100% på ljuskälla.
Källa: https://www.ikea.com/se/sv/p/tradfri-tradloes-roerelsesensor-vit-70429913/

Installation av TRÅDFRI Rörelsesensor

I mitt förra inlägg in TRÅDFRI Styrbar så insåg jag att alla funktioner inte blir tillgängliga ifall jag adderar sensorn direkt till IKEA gateway och sedan skapar en grupp med lampan.

However, the steps should be similar across all Android devices and generations.

1. From the main screen of your Android device, tap on the Apps button.
   

1. Then look for and tap on Settings.
   

1. Go to Wi-Fi.
   

1. Make sure the Wi-Fi feature is enabled by flipping the On / Off switch to the On position then wait for the network list to populate and tap on the Wi-Fi network that you want to connect to.
   

1. Your Android device will automatically connect to the network if there is no security enabled, or you have connected to it in the past.

   If tapping it does nothing, then it means the password you typed in is too short.
   

1. If the Wi-Fi network you are trying to connect to is hidden, then tap the Other... option.
   

1. Enter the Wi-Fi networks name using the on screen keyboard and tap Join at the bottom right if no password is required to connect.

   However, the steps should be the same across all iOS devices and generations.

   To check if your iOS mobile device is connected to Wi-Fi:

   1. From the main screen of your device, look for and open Settings.
      
   1. With Settings open, look for the Wi-Fi field.

      The Wi-Fi network name will show Connected underneath and the Wi-Fi symbol will fill up in the top right corner of the screen.
      

   1. If the Wi-Fi network requires a password, then you will see a small padlock next to the Wi-Fi symbol, which also means the connection is secure.

      Additional Information

      To better assist you, please answer this question.

      27. Enheter hittades
      8. Check Wi-Fi

      Depending on what device (Smartphone or Tablet) and which generation you have, the menu theme and options might look slightly different on your screen. Om jag trycker en gång på Dag/Nattläge knappen kommer en röd lysdiod visa vilken inställning sesnorn har.

      Basic Setup for Ikea Tradfri Smart Lighting Gateway Kit

      Show Me How

      Clicking this button will open a new guide that will provide you with steps to resolve your issue.

      28. Restart

      1. Hold down the power button on your Android device.
         Depending on the manufacturer and model of Android device you have, the location of the power button will vary.
      2. A prompt will appear on-screen.

         På det sättet kan du skapa en mer anpassad och bekväm belysningsmiljö i ditt hem.

         FAQ

         Vilka är de vanligaste problemen med IKEA Trådfri fjärrkontrollen?

         De vanligaste problemen inkluderar anslutnings- och synkroniseringsfel, problem med räckvidden och uppdateringar.

         Hur kan jag lösa problem med Trådfri gatewayen som inte uppdaterar sig?

         Om gatewayen inte uppdaterar sig till senaste versionen och visar felmeddelanden om väntande uppdateringar och misslyckade försök, kan detta bero på att någon av enheterna i gatewayen inte går att nå.

         Uppdateringsfel och väntande uppdateringar

         Ett vanligt problem med Trådfri gatewayen är att den inte uppdaterar sig till den senaste versionen. This field will display the current Wi-Fi status on the right hand side:

      • Off - the Wi-Fi antenna is currently disabled.
      • Not Connected - Wi-Fi is turned on, but your device is not currently connected to a network.
      • Wi-Fi network name - Wi-Fi is turned on, and the network name displayed is the network your device is currently connected to.
        

   2. You can also tap on the Wi-Fi field and make sure the Wi-Fi switch is in the On position.

      How to Add a Sensor to Your Ikea Tradfri Gateway

      Show Me How

      Clicking this button will open a new guide that will provide you with steps to resolve your issue.

      33. Additional Information

      To better assist you, please answer this question.

      10. How to Proceed?

      Please select an option to proceed.

      29.

      Om du också har stött på problem med din Trådfri fjärrkontroll, oroa dig inte!

      

      Check App Updates

      1. Open the Play Store.
         
      1. At the top, choose the three bars on the left of the search line.
         
      1. Choose My apps & games at the top.
         
      1. Choose Update All.
         

      4.

      Detta kan bero på problem med strömförsörjningen.

      För att lösa detta problem, testa att byta ut nätadaptern och se om problemet löses. You will see that this option also shows one of three statuses to the right:
      

   3. Off - the Wi-Fi feature is disabled
   4. Not Connected - there is no Wi-Fi connection establishe
   5. the Wi-Fi connections name - there is a Wi-Fi connection already established.
   1. Make sure that the Wi-Fi feature is enabled by flipping the On/Off switch to the green position.

      Det kan resultera i felmeddelanden om väntande uppdateringar och misslyckade försök att uppdatera gatewayen.

      För att lösa detta problem, kontrollera enhetslistan i Trådfri appen och se till att alla enheter är tillgängliga. Speciellt sedan det började gå att
      lägga till enheter från andra Zigbee tillverkare utöver TREÅDFRI serien.

      The switch should be green in color and will display the network that you are currently connected to directly beneath it with a check mark to the left.
      

   2. 
      

   24.